LED ALUMINUM PROFILE #880
SKU: LCPROF-880-8FT
💡 8 ft (2.44 m) length · custom cuts · black or white finish · adjustable light angle
The #880 LED aluminum profile lets you set your light angle two ways: with your choice of lens, and by aiming the fixture itself, even after installation is complete. With its 42 × 42 mm (1.650 × 1.650 in) square section, designed for suspended or recessed installation, it turns a simple LED strip into a linear fixture with straight, clean lines and a modern look.
Extruded from ALCOA 6063-T5 aluminum, it acts as a heat sink: the strip runs cooler, its LEDs age more slowly and your lighting keeps its brightness longer. Prime or Optiflex lenses, or a concave diffuser that hides the light source while keeping the profile in the foreground: combine them for a light distribution tailored to your needs. It can be painted to match your décor. 3-year warranty.
- Custom fabrication, cETL certified
- Components also sold separately
- Delivery across Canada
Custom Fabrication
We build your custom fixtures to your lengths in our cETL-certified warehouse. A manufactured fixture must be approved to meet the electrical code and the requirements of the Régie du bâtiment du Québec: ours are.
Get your quote in minutes with our Custom LED Builder. Prefer to assemble it yourself? All components are also sold separately.
Which LED Strip Should You Choose?
The #880 takes our 24V LED strips up to 10 mm wide:
- 4.8 W/m LED strip
- 9.6 W/m LED strip
- 19.2 W/m LED strip
- 28.8 W/m LED strip
- 11 W/m COB LED strip
- 10 W/m spa and sauna LED strip
- 14.4 W/m RGB LED strip
- 19.2 W/m RGBW LED strip
- 20 W/m CCT LED strip
- 17 W/m Dim-to-Warm LED strip
Lenses and Finishes
- Prime or Optiflex lenses – flat lenses.
- Concave diffuser – hides the light source while keeping the profile in the foreground.
- Finishes – black or white; the profile can also be painted.
Indoors or outdoors: the profile is aluminum, the strip is what makes the difference. For outdoor or damp locations, pick the waterproof version of your strip from our IP66 outdoor LED strips.
The dimensioned drawing is in the spec sheet available for download below.
279.95$
SPECIFICATIONS
- Type: adjustable light angle profile, suspended or recessed
- Dimensions: 42 mm × 42 mm (1.650 × 1.650 in)
- Compatible strips: 24V, up to 10 mm wide
- Length: 8 ft (2.44 m) · custom cuts
- Finishes: black, white
- Lenses: Prime, Optiflex or concave diffuser
- Installation: suspended or recessed; swivel hardware to aim the fixture
- Design: meets North American woodworking standards
- Material: ALCOA 6063-T5 aluminum alloy
- Use: indoor and outdoor (IP66 strip outdoors)
- Warranty: 3 years · certified for the Canadian market
LED ALUMINUM PROFILE #880
