6" 20W MARINE LED LIGHT 100-277V – NEMA 4X

💡 NEMA 4X · 20W, up to 3,142 lumens · 3000K or 5000K · 0-10V dimming · 100-277V · delivered in 3 to 5 business days

The 6-inch 20W marine LED light is a sealed fixture designed for livestock barns and farm buildings, where humidity, dust and frequent washing destroy conventional lighting. NEMA 4X certified, it withstands hose-down washing and corrosion.

At just 20W, it delivers up to 3,142 lumens (up to 170 lm/W) with a 75,000-hour lifespan. Dimmable with 0-10V down to 10% and available in 3000K or 5000K, it is a cost-effective, durable barn and farm lighting solution for dairy barns, hog barns, poultry houses and wet locations.

• NEMA 4X certified: sealed and corrosion resistant
• Up to 170 lm/W and 75,000-hour lifespan
• Junction box included
• Delivered in 3 to 5 business days across Canada

Built for livestock buildings

Livestock buildings are tough on lighting: constant humidity, dust, corrosive gases and high-pressure cleaning. This farm LED light is sealed to last there: die-cast aluminum housing, frosted polycarbonate diffuser and IK08 impact resistance.

Sealed and corrosion resistant (NEMA 4X)

NEMA 4X certification means the enclosure protects against dust, rain, splashing and hose-directed water, and resists corrosion. It is the safe choice for farm buildings, car washes and other wash-down locations.

3000K or 5000K: which one?

• 3000K (warm white) – softer light for resting areas and spaces where dimmer ambiance is preferred.
• 5000K (daylight) – bright light for work areas, service alleys and inspections.

Both versions offer the same efficiency and ruggedness; only the tone of the light changes.

0-10V dimming and automation

0-10V dimming adjusts output down to 10%, to simulate lighting cycles or cut energy use. If your automation controller provides a "source" 0-10V signal, our 0-10V source/sink dimming translator makes it compatible with the fixtures.

Quick installation

The included junction box, with two 3/4-in and two 1/2-in PVC conduit entries, speeds up wiring. Lightweight (0.8 kg), the fixture surface-mounts in minutes.

Check before you buy: 100-277V

This fixture runs on 100-277V. It is not suitable for 347V networks; for those, contact our team or see our LED high bays rated 120-347V.