BLUETOOTH 0-10V WIRELESS FIXTURE CONTROLLER
SKU: LCBT-NODE-0-10V-T
💡 Fixture controller · Bluetooth mesh to 0-10 V · 12 V DC powered · on-board antenna
The Bluetooth 0-10 V wireless controller adds a 0-10 V dimmable fixture to the Bluetooth network: it receives commands from switches, sensors and the mobile device, and turns them into a 0-10 V signal for the fixture's driver.
It is powered from the 12 V auxiliary output of a dim-to-off LED driver and connects through a 3-wire low-voltage connector. Like every device on the mesh network, it relays the signal to its neighbours.
- Bluetooth mesh to 0-10 V converter
- Continuous bi-level dimming, high-end trim, zoning
- Powered from the driver's 12 V auxiliary output
- 3-wire low-voltage connector
- Button reset (5 s)
Specifications
- Input: 12 V DC, > 50 mA
- Dimming output: 0-10 V, 20 mA max.
- Network: Bluetooth mesh, on-board antenna
- Wireless range: 30 m (100 ft), depending on the installation
- Connection: 3-wire connector: yellow VCC, purple DIM+, pink GND
- Protection rating: IP20
- Operating temperature: -20 °C to +60 °C
- Dimensions: Ø 1.26 in (32 mm) × 1.57 in (40 mm)
- Finish: white
BLUETOOTH 0-10V WIRELESS FIXTURE CONTROLLER
Technical Files
Installation Documents
