LED STRIP 14.4W/M (RGB)

💡 Available reels: 5 m (16.4 ft) or 30 m (98.4 ft)

The 24V 14.4W/m outdoor RGB LED strip (IP66) is the color lighting solution for residential and commercial projects requiring dynamic, multicolor light effects in outdoor environments. At 14.4 watts per meter with 60 SMD 5050 diodes per meter, it produces vivid, saturated colors across a 120° beam angle — ideal for festive ambiances, colorful architectural highlights and decorative deck and facade lighting.

Running on constant-voltage 24V DC, this RGB strip ensures stable power and uniform color output along its entire length. Its molded silicone protective sleeve provides an IP66 rating, offering resistance to powerful water jets from any direction — heavy rain, wash-down, condensation and repeated freeze-thaw cycles. cULus certified and compliant with electrical standards in Canada and the United States, with a lifespan of up to 50,000 hours.

Available Colors                     

This outdoor RGB LED strip combines three independent color channels to produce a near-unlimited spectrum of hues and effects:

• Red (R) – Pure, saturated color for warm and festive ambiances.
• Green (G) – Ideal for natural effects, landscaped spaces and themed decorations.
• Blue (B) – For cool, contemporary and architectural atmospheres.
• RGB mix – Millions of intermediate colors, approximate warm white, transition effects and animated sequences via the controller.

Recommended Applications                     

This 24V 14.4W/m IP66 outdoor RGB LED strip is ideal for:

• Decorative lighting of decks, balconies and pergolas with color-changing effects
• Color highlighting of commercial facades and storefronts to attract attention
• Ambient lighting for pool surrounds, spas and landscaping
• Color accentuation of columns, retaining walls, garden structures and fences
• Festive and event lighting for restaurant patios, hotels and commercial outdoor spaces
• Exterior stair riser lighting with color effects

Performance and Installation                     

With a 120° beam angle, this RGB LED strip delivers uniform, shadow-free light. Its IP66 protection rating makes it suitable for environments exposed to direct rain, snow and water jets — decks, balconies, facades and exterior staircases. For submerged or underwater installations, see our full lineup of waterproof outdoor LED strips.

For maximum lifespan and a premium finish, installation inside an aluminum profile is strongly recommended. The profile mechanically protects the strip against impact, thermal expansion and ice buildup, improves heat dissipation and delivers a clean architectural look through its integrated diffuser.

Power Supply Calculator                     

This RGB LED strip consumes approximately 4.5 watts per foot. Simply multiply the total installed length by 4.5 to determine the required wattage.

Always add a 20% safety margin to ensure system stability and longevity.

• 1 reel (5 m / ~16 ft) = 72W → 115W power supply recommended
• 2 reels (~32 ft) = 144W → 150W or 200W power supply recommended
• 3 reels (~49 ft) = 216W → 250W power supply recommended
• 4 reels (~64 ft) = 288W → 300W power supply recommended

Use a non-dimmable 24V power supply matched to the total calculated wattage. Color control is handled by the RGB receiver, not the power supply.

Color Control                     

This outdoor RGB LED strip requires a dedicated controller for color, brightness and effect management. A standard 120V wall dimmer is incompatible with this strip type — it cannot independently control the individual color channels.

A zone is any section of lighting you want to control independently. If you want all RGB lighting to always operate together, a single receiver is sufficient. However, if the total power of your zone exceeds 225W, a 20A LED amplifier must be added — approximately 3 reels of this strip per zone.

• W24 – Wireless RGB wall controller (AAA batteries), range up to 100 feet, up to 4 zones.
• R24 – RGB radio-frequency remote, range up to 100 feet, up to 4 zones.
• Universal 4-Zone 12A Receiver – Installed between the power supply and the LED strip to receive the signal (1 per independent zone).
• 20A LED Amplifier (480W at 24V) – Recommended for installations exceeding 225W per zone.
• WiFi Controller – Full color and effect control via Apple or Android mobile app.

Length Options                     

Available in standard 5-meter or 30-meter reels, this outdoor RGB LED strip can also be supplied in a custom length.