4 ZONE R6 REMOTE ONLY - WHITE LEDCO

The R6 4-zone remote is a 2.4 GHz radio-frequency remote sold separately, designed to control single-color white LED strips through an already-installed universal 4-zone 12A receiver. It is ideal for installations requiring an additional remote on an existing system, or to replace a lost remote. Its wireless range reaches 30 meters, comfortably covering most residential and commercial spaces.

Its tactile brightness wheel allows precise adjustment across 256 levels with continuous hold, or 10 levels with short presses. The four zone buttons let you select, turn on or turn off each zone independently — or multiple zones simultaneously with rapid presses. The R6 is compatible with single-color white LED strips (12V or 24V) paired to a LEDCO universal receiver. It is not compatible with RGB, RGBW or Pixel strips, which require the R24 remote.

Key Functions  

• Global On/Off – Short press to activate or deactivate all zones simultaneously.
• Zone selection – Short press to turn on a zone (1 to 4); hold 2 seconds to turn it off. Multiple zones can be selected simultaneously.
• Tactile brightness wheel – Continuous adjustment across 256 levels for the selected zone.
• Brightness +/- – Short press: 10 levels; hold 1 to 6 seconds: continuous adjustment.
• Scene recall – Memorizes and recalls custom brightness levels per zone.

Pairing With a Receiver  

Connect the power supply (12V or 24V) and the LED strip to the receiver, then power on the system. Press the MATCH button on the receiver — the RUN indicator will blink to signal that the receiver is ready. Then press one of the four zone buttons on the remote: if the RUN indicator blinks again, pairing is successful. Repeat for each additional receiver to pair. To clear all pairings, hold the MATCH button for 5 seconds until the indicator blinks rapidly.