R21 STARTER KIT - 4-ZONE REMOTE AND RECEIVER - WHITE

R21 STARTER KIT - 4-ZONE REMOTE AND RECEIVER - WHITE

Name: R21 STARTER KIT - 4-ZONE REMOTE AND RECEIVER - WHITE
Brand: Ledco
SKU: LCR21-REMOTE-WH
Availability: InStock

SKU: LCR21-REMOTE-WH

This kit includes a 4-Zone R6 Remote aswell as a receiver. The 4-Zone Remote utilizes 2.4GHz radio-frequency wireless technology, offering up to 30 meters of range. It can be paired with the receiver, enhancing its versatility. The device features a sensitive touch wheel for precise brightness tuning, designed for durability and efficiency.

HOW TO CONNECT THE REMOTE TO THE RECEIVER:

Connect the LED power source to the receiver, choosing between 12V or 24V based on the LED strip's voltage.
Attach the LED strip to the receiver.
Power on the system. If correctly connected, a "RUN" light on the receiver will illuminate.
Locate the "MATCH" button on the receiver. Press it; the "RUN" light will flash, indicating the receiver is ready for pairing.
Press one of the four zone button on the remote. If the "RUN" light blinks again, the remote has successfully connected to the receiver, allowing control over the LED strip.
Repeat steps 4 and 5 if you want to pair additional receivers with the remaining zones on the remote.

To remove all paired devices, press and hold the "MATCH" key for 5 seconds. When the LED indicator rapidly flashes several times, it signifies that all matched devices have been successfully deleted.

KEY FUNCTIONS:

On/Off: A short press toggles all zone lights on or off.

Zone Selection: Short press to select and turn on a specific zone (1, 2, 3, or 4). Hold for 2 seconds to turn off the selected zone light. Rapidly pressing multiple zone keys allows for simultaneous selection of multiple zones.

Brightness Wheel: Touch to adjust the brightness of the currently selected zone.

Brightness +/-: Short press adjusts brightness across 10 levels, while holding for 1-6 seconds enables continuous adjustment through 256 levels for the selected zone.

Scene Control: Short press to recall a scene. Hold for 2 seconds to save the current state as a scene. The LED indicator confirms successful saving by lighting up longer. Scenes can be recalled or saved across all 4 zones simultaneously.