LED STRIP 17W/M (DIM TO WARM)

💡 Available reels: 5 m (16.4 ft) or 30 m (98.4 ft)

The Dim-to-Warm LED strip 24V 17W/m (2400K–4000K) faithfully replicates the natural behavior of incandescent and halogen bulbs: the lower you set the dimmer, the warmer and more amber the light becomes. At full power, it emits a neutral white at 4000K; gradually reduced to its minimum, it shifts all the way to a very warm, golden 2400K, recreating that enveloping, intimate atmosphere characteristic of filament lamps. It is the ideal solution for high-end spaces that demand a living, dynamic light ambiance.

Running on 24V DC at 17W per meter, this indoor IP22 strip is designed for refined residential and commercial installations. It delivers a continuous color temperature range across the full dimming curve — no jumps, no strobing — for a transition as smooth and gradual as a filament lamp. Compatible with LEDCO 24V power supplies and aluminum profiles for a clean architectural finish.

Recommended Applications                      

The Dim-to-Warm LED strip is the premium choice for spaces where the lighting atmosphere evolves throughout the day or adapts to different uses:

• High-end residential living rooms, dining rooms and bedrooms
• Fine dining restaurants, bars and lounges requiring an evolving ambiance
• Hotels and suites: guest rooms, corridors and prestige common areas
• Cove lighting and indirect illumination in niches, stretched ceilings and coffered ceilings
• Accent lighting for artwork, sculptures and valued architectural elements
• Any space seeking to replicate the warmth of incandescent lighting with LED efficiency

Performance and Installation                      

Installation inside an aluminum profile is strongly recommended to optimize heat dissipation, protect the strip and achieve a clean, uniform linear finish. The power supply must be sized according to the total installed length — see the calculation below.

Power Supply Calculator                      

This Dim-to-Warm LED strip consumes 17W per meter, or approximately 5.2W per foot. Multiply the total installed length by 17 (in meters) and add a 20% safety margin to ensure system stability and longevity.

• 1 reel (5 m / ~16 ft) = 85W → 115W power supply recommended
• 2 reels (~32 ft) = 170W → 200W power supply recommended
• 3 reels (~49 ft) = 255W → 300W power supply recommended

Use exclusively a 24V power supply matched to the total calculated wattage.

Dimming and Control                      

The Dim-to-Warm LED strip is controlled exactly like a standard single-color white strip: a standard 120V LED dimmer is all you need for the entire installation. No RF receiver, remote control, or dedicated controller is required.

As you lower the dimmer, the color temperature automatically shifts from 4000K down to 2400K, replicating the natural behavior of filament lamps. For best results, use a 120V LED dimmer LEDCO with a dimmable 24V power supply.

Length Options                      

Available in standard 5-meter or 30-meter reels. For a custom length, contact our team.