LED ALUMINUM PROFILE #86
SKU: LCPROF-86-8FT
💡 8 ft (2.44 m) or 16 ft (4.88 m) lengths · custom cuts up to 192 in · aluminum, black or white finish
The #86 LED aluminum profile is a recessed profile designed to make the light source invisible. Its 19.4 × 12 mm (0.767 × 0.472 in) body sits in a groove and its 27.5 mm (1.083 in) flange gives a clean, flush finish. It turns a simple LED strip into a line of light built into furniture or architecture.
Its back rail and butterfly clips let it hold even in thin materials that are too thin for standard clips. Extruded from 6063-T5 aluminum, it acts as a heat sink and extends the life of the strip. It can be painted to match your décor. 3-year warranty.
- Custom fabrication, cETL certified
- Components also sold separately
- Ships in 24 to 48 h
- Delivery across Canada
Custom Fabrication
We build your custom fixtures to your lengths in our cETL-certified warehouse. A manufactured fixture must be approved to meet the electrical code and the requirements of the Régie du bâtiment du Québec: ours are.
Get your quote in minutes with our Custom LED Builder. Prefer to assemble it yourself? All components are also sold separately.
Which LED Strip Should You Choose?
The #86 channel is 16.4 mm wide inside. It takes these 24V LED strips:
- 4.8 W/m LED strip
- 9.6 W/m LED strip
- 19.2 W/m LED strip
- 28.8 W/m LED strip
- 11 W/m COB LED strip
- 10 W/m spa and sauna LED strip
- 14.4 W/m RGB LED strip
- 19.2 W/m RGBW LED strip
- 20 W/m CCT LED strip
- 17 W/m Dim-to-Warm LED strip
Lenses and Finishes
- Opaque lens – diffuses and softens the light; available with all three finishes. Also sold separately in 8 ft.
- Coffee black lens – for a black profile in a single tone. Also sold separately in 8 ft.
- Frosted lens – sold separately in 8 ft; lets up to 85% of the light through.
- Finishes – natural aluminum, black or white; the profile can also be painted.
Accessories
- #86 end cap with hole
- #86 end cap with hole, black
- #86 end cap with hole, white
- #86 end cap without hole
- #86 end cap without hole, black
- #86 end cap without hole, white
- Standard mounting clip – sold individually.
Indoors or outdoors: the profile is aluminum, the strip is what makes the difference. For outdoor or damp locations, pick the waterproof version of your strip from our IP66 outdoor LED strips.
The dimensioned drawing is in the spec sheet available for download below.
34.95$
SPECIFICATIONS
- Type: recessed flanged profile
- Body: 19.4 mm × 12 mm (0.767 × 0.472 in) · flange: 27.5 mm (1.083 in)
- Inside channel width: 16.4 mm (0.646 in)
- Lengths: 8 ft and 16 ft · custom up to 192 in
- Finishes: natural aluminum, black, white
- Lenses: opaque, coffee black · frosted sold separately
- Installation: in a groove, back rail and butterfly clips (thin materials)
- End caps: with or without hole (aluminum, black, white)
- Material: ALCOA 6063-T5 aluminum alloy
- Use: indoor and outdoor (IP66 strip outdoors)
- Warranty: 3 years · certified for the Canadian market
LED ALUMINUM PROFILE #86
