4 ZONE W24 WALL CONTROLLER - RGB/RGBW LEDCO

The W24 4-zone RGB/RGBW wall controller is a wireless 2.4 GHz glass touch panel designed to control RGB and RGBW LED strips directly from the wall — with the precision and elegance of a permanent flush-mounted panel. It mounts on the surface or flush, and connects wirelessly to one or more universal 4-zone 12A receivers positioned near the LED strips. Its wireless range reaches 30 meters, comfortably covering most residential and commercial spaces.

With its highly sensitive glass touch panel, the W24 delivers precise and smooth color control across each of its 4 independent zones. The W button instantly activates the white channel on RGBW strips, allowing a seamless switch between an RGB color and pure white with a single press. It is the ideal solution for permanent installations where an elegant wall control is preferred over a handheld remote. Compatible with RGB and RGBW LED strips (12V or 24V) paired to a LEDCO universal receiver. For single-color white strips, use the W21 controller instead.

Key Functions  

• Global On/Off – Short press to activate or deactivate all zones simultaneously.
• Zone selection – Short press to turn on a zone (1 to 4); hold 2 seconds to turn it off. Multiple zones can be selected simultaneously.
• Tactile color wheel – Scrolls through the full RGB spectrum smoothly for the selected zone.
• W button – Activates the white channel (RGBW strips only) for pure white lighting independent of the RGB channels.
• Speed +/- – Short press: 10 speed levels; hold 2 seconds: instant maximum or minimum speed for dynamic effects.
• Scene recall – Memorizes and recalls custom colors and effects per zone.

Pairing With a Receiver  

Connect the power supply (12V or 24V) and the RGB/RGBW LED strip to the receiver, then power on the system. Press the MATCH button on the receiver — the RUN indicator will blink to signal that the receiver is ready. Then press one of the four zone buttons on the W24 controller: if the RUN indicator blinks again, pairing is successful. Repeat for each additional receiver to pair on the remaining zones. To clear all pairings, hold the MATCH button on the receiver for 5 seconds until the indicator blinks rapidly.