8 ZONE WALL CONTROLLER RF MILGT -ALL (B8)

The B8 8-zone wall controller is the large-format version of the wireless touch panel for installations that require more than four independent zones. Powered by two AAA batteries, it mounts magnetically to any wall with no electrical wiring required. Its tempered glass capacitive touch panel provides precise control over 8 fully independent zones, each capable of driving an unlimited number of universal 12A receivers. It is the natural choice for high-end residential, commercial, or hospitality projects that require zone-by-zone control across an entire floor or building.

Like the B4, the B8 is compatible with all low-voltage LED strip types — single-color white, CCT, RGB, and RGBW at 12V or 24V — and includes the tactile color wheel for RGB/RGBW, color temperature adjustment for CCT, a continuous brightness slider from 0.1% to 100%, the W button for the white channel on RGBW strips, dynamic effect speed control, and a 60-second automatic shutoff delay. Its wireless range reaches 30 meters. For RGB or RGBW installations, it can also be paired with the WiFi controller to add voice or app-based control.

Key Functions  

• Global On/Off – Activates or deactivates all assigned zones with a single touch.
• Zone selection – Individual control of each of the 8 zones; each zone drives an unlimited number of receivers.
• Touch color wheel – Scrolls through the full RGB spectrum for RGB and RGBW strips.
• CCT adjustment – Controls color temperature from warm white to cool white for CCT strips.
• Brightness slider – Continuous dimming from 0.1% to 100% by simple touch slide.
• W button – Activates the pure white channel on RGBW strips independently of the RGB channels.
• Speed +/- – Controls the speed of dynamic effects for RGB and RGBW strips.
• 60-second delay off – Lights turn off automatically after 60 seconds on the selected zone.

Installation and Pairing  

Insert two AAA batteries into the panel, then mount the magnetic bracket to the wall using the included adhesive tape or screws. To pair a zone, turn off the universal 12A receiver, wait 10 seconds, then power it back on. Once the indicator is active, briefly press the desired zone button 3 times within 3 seconds. Three slow blinks confirm successful pairing. To clear pairings, turn the receiver off and on again, then press the zone button once within 3 seconds.